Magnetic Jewelry Clasp

Seashell Jewelry Making

This article will describe some tips and advices how to drill holes of seashells in making of seashells jewelry. Drilling holes of seashells is quite difficult and shall be done very carefully. Seashells are often quite fragile. Be very careful drilling holes in them and also try to pick shells that are not chipping or flaking at the edges. There are a few precautions that we should know and take in order to prevent the seashells from crack and damage.

1 - Drilling bits

Use A Dremel. A Dremel tool works well also because it's higher speed than your regular drill. Especially good for delicate shells; use a very small bit. It wasn't possible to use a very fast speed because the hardness of the shell made the drill bit slip and mark the surface. Once the hole was started, continue with slow because even then the drill would overheat from the effort. We had to stop every 5 minutes and allow the drill to cool down for about 20 minutes to half an hour. Also suggested to use diamond points to drill.

2 - Water

When you drill with diamond points, always use water to cool the points or they will fail quickly. This also keeps the dust down, but wear a good quality filter mask or use a vacuum to catch any dust/spray. Seashell dust is toxic, and I don't mean a little bit toxic. You can really hurt yourself if you breath it in, or get it into your eyes, a cut or sore, or ingest it. Sometimes the particulates are so small you don't realize they're in the air around you. When you breathe this dust in, it gets embedded in your lungs and it won't come out. It will literally be there forever, and it's toxic. Obviously, don't put your drill in the water, just the tip of the bit doing the drilling.

3 - Start Drilling

Make sure the drill bit is sharp, and that you are using a high speed drill. Use the smallest drill bit that will accommodate the chain or whatever you're putting through the shell. Secure the shell firmly in a vise or other arrangement to make sure it cannot move during the drilling.If the shell is thin, I would suggest putting tape over the spot where you are drilling to help prevent the shell from splintering or cracking.Lay the shell with the top up so that if spintering does occur as the bit reaches the other side, any splintering will be on the bottom (back) of the shell.

If you're not comfortable using a drill, practice first on some scrap shells before drilling in those you want to use.

Now when you start to drill, you're going to do it like this: hold the drill in a straight up and down position so that the hole will be straight. Hold the drill firmly so that the bit won't go skidding across the surface of the stone. (Now you know why you need practice pieces.) You're going to touch the drill bit down semi-firmly, like you mean it, but then lift the drill bit out of the hole so water can pool inside it. Repeat. You can do it pretty quickly, too. Touch down, lift, touch down, lift, etc. When you're almost all the way though, Stop. Flip your stone over and begin to drill from the other side. This will prevent a "blow out" or chipping the stone or glass where the hole should be. It takes practice to do this, so don't be hard on yourself. Glass and stone will pretty much drill the same. Anything else may be unpredictable, so a practice piece is necessary.

Seashell Jewelry Making

Seashells Jewelry

Before to start painting of seashells that we collected at the beach, first thing we should do is cleaning the seashells. There are several known methods for cleaning your live seashell specimens.

Burying: This is easiest way to clean the Seashells but will take about two months. Dig a hole somewhere in around your home or yard and bury the seashells about 18 inches (deep enough so animals will not dig them up). It shall need to remain buried until insects, larvae, worms, and bacteria remove all the tissue. The longer you leave them the better.

Freezing: Use a Ziplock bag and cover it with full of water, zip it and then place in the freezer. When you are ready to clean them, let the bag thaw at room temperature until completely defrosted.

Boiling: Boil the seashells in the pot with some of water for a few minutes (more seashells need longer). Use tongs to remove one shell at a time. So you don't burn yourself, grasp shell with gloves or a towel and gently pull out the animal tissue inside.

Heating: As long as you don't mind the smell in your microwave, this is an easy method. The time it takes to cook your seashells can really vary by microwave, so just try it until you figure out how long for each seashell. Grasp cooked seashell with gloves or a towel and gently pull out the animal tissue inside.

After that, the last step that we should do is bleaching the seashells. When no tissue remains, soak the seashells in a 50-50 solution of bleach and water. The length of time depends on the type of seashells and the quantity of seashells being cleaned. We must remove them after the "periostracum" is gone. The periostracum is the flaky, leathery covering that covers most live seashells. To make your seashells a nice finish and more shining, you can wipe them with mineral or baby oil.

Seashell Jewelry Making

This article will describe some tips and advices how to drill holes of seashells in making of seashells jewelry. Drilling holes of seashells is quite difficult and shall be done very carefully. Seashells are often quite fragile. Be very careful drilling holes in them and also try to pick shells that are not chipping or flaking at the edges. There are a few precautions that we should know and take in order to prevent the seashells from crack and damage.

1 - Drilling bits

Use A Dremel. A Dremel tool works well also because it's higher speed than your regular drill. Especially good for delicate shells; use a very small bit. It wasn't possible to use a very fast speed because the hardness of the shell made the drill bit slip and mark the surface. Once the hole was started, continue with slow because even then the drill would overheat from the effort. We had to stop every 5 minutes and allow the drill to cool down for about 20 minutes to half an hour. Also suggested to use diamond points to drill.

2 - Water

When you drill with diamond points, always use water to cool the points or they will fail quickly. This also keeps the dust down, but wear a good quality filter mask or use a vacuum to catch any dust/spray. Seashell dust is toxic, and I don't mean a little bit toxic. You can really hurt yourself if you breath it in, or get it into your eyes, a cut or sore, or ingest it. Sometimes the particulates are so small you don't realize they're in the air around you. When you breathe this dust in, it gets embedded in your lungs and it won't come out. It will literally be there forever, and it's toxic. Obviously, don't put your drill in the water, just the tip of the bit doing the drilling.

3 - Start Drilling

Make sure the drill bit is sharp, and that you are using a high speed drill. Use the smallest drill bit that will accommodate the chain or whatever you're putting through the shell. Secure the shell firmly in a vise or other arrangement to make sure it cannot move during the drilling.If the shell is thin, I would suggest putting tape over the spot where you are drilling to help prevent the shell from splintering or cracking.Lay the shell with the top up so that if spintering does occur as the bit reaches the other side, any splintering will be on the bottom (back) of the shell.

If you're not comfortable using a drill, practice first on some scrap shells before drilling in those you want to use.

Now when you start to drill, you're going to do it like this: hold the drill in a straight up and down position so that the hole will be straight. Hold the drill firmly so that the bit won't go skidding across the surface of the stone. (Now you know why you need practice pieces.) You're going to touch the drill bit down semi-firmly, like you mean it, but then lift the drill bit out of the hole so water can pool inside it. Repeat. You can do it pretty quickly, too. Touch down, lift, touch down, lift, etc. When you're almost all the way though, Stop. Flip your stone over and begin to drill from the other side. This will prevent a "blow out" or chipping the stone or glass where the hole should be. It takes practice to do this, so don't be hard on yourself. Glass and stone will pretty much drill the same. Anything else may be unpredictable, so a practice piece is necessary.

Seashell Jewelry Making

There is no denying that jewelry plays an indispensable part in our daily life. In most women's opinions, it is the same important as beautiful dress. We can expect different kinds of accessories both on formal and casual occasions. Every woman has at least one piece in their wardrobe. In fact, women usually have large collections which come in various types, including earrings, necklaces, pendants, brooches, bracelets, rings, and so on.

At present, the normal accessories in the market can not meet the needs of people any more. People now are fond of collecting trendy and stylish pieces to express their individuality. Thus, they begin to search other ways to get unique items. On this occasion, jewelry making emerges as the times require. More and more people choose to create their own jewelry by hand. These handmade items are exclusive to make a difference.

Some people may think that jewelry making is difficult and complex process. As a matter of fact, it is quite easy and requires no professional technique. You will complete a perfect fashion article with full preparation. The following are four basic elements that you should pay attention to.

Loose Beads

In recent years, beaded jewelry gains great popularity in our life. Many people prefer to wear pieces made of beads. Generally, beads are the fundamental elements for making your own jewelry. Usually, we can find a large variety of beads available in different materials, including pearl, shell, coral, crystal glass, lampwork glass, agate, howlite turquoise, hematite, Tibetan silver, sterling silver, etc. With the vast choice, there is no doubt that you can find your favorite one.

Cord, Thread, Wire

Apart from loose beads, cord, thread and wire are also essential elements. You will never finish any piece without them. They come in various colors and materials. Make sure to choose the right type for your design. What's more, keep in mind to leave the appropriate length of cord or wire.

Clasps

Never forget the clasps while preparing your different materials. Maybe, some people choose to tie the cord or thread together. However, this will influence the beauty of your handmade items. Why not apply a clasp? You will be able to find many clasps in various styles, such as, magnetic, box, lobster, hook, strand, toggle, etc.

Findings

Findings are necessary components that employed in the manufacture of jewelry. There are different types of findings which are used for different purposes, like charms, spacers, hook, pins, and other kinds.

Learn The Incredible Art Of Taking Ordinary Silverware And Molding It Into Beautiful Bracelets And Necklaces. Get The Dvd From Professional Jewelry Maker Maryann Cherubino.

Learn Everything You Need To Know To Start Making Your Own Beautiful Handcrafted Jewelry In This Amazing How To Book.

An Award-winning, Fool-proof Jewelry Making Blueprint That Will Help You Earn Thousands Of $$$ Right From The Comfort Of Your Home, Guaranteed! Promote This Unique Niche, High Potential, Rapid Buyers And Make Money Opportunity!

Secrets To Making Money From Jewelry And Beading. Resource Package Contains E-book, Audio Products And Bonus Material For Starting Your Own Home Based Business. Affiliate Resource Page At Http://www.stitchingcow.com/affilate-support-jewel ery-resource

Want to put an attractive symbol, your name or an astounding statement on a piece that will surely wow everyone? Then get a custom silicone bracelet. These bracelets have started out as a fad and currently, there seems to be no end to the artistic appeal that the designs have established. You get to explore your creative talents by adding your very own personal touch.

How to Customize

There are stores as well as online sites that allow you to choose and make the perfect designs for your custom silicone bracelet. First you need to choose the product as well as the quantity. Next, pick colors that you want the bracelets to have. You are free to choose solid colors like black, blue, yellow, green, red, white and many more and also use a combination of different tones for more fun and variety.

Reliable manufacturers can make every single one unique and have the color or mix of colors according to your specifications. Finally, you have to choose optional imprint, submit optional artwork if you have any through email or upload or type in your personalized message. You also get to choose which part of the custom silicone bracelet you intend to place symbols or patterns and whether you want the message or text embossed, screen printed or debossed.

Fun and Convenience

You can order as few as a single bracelet but prices will decrease if you order in bulk. These are all made of 100% pure silicone and are highly flexible and elastic to fit any wrist size. There are variations in the band lengths as well to easily suit children, adults and extraordinarily large wrists. Ordering in bulk make great promotional and unity items during club events, awareness programs and other matters in which you want to spread the passion and idea through the customized symbols and message on the bracelets. You may want to use the colors of your organization and add a picture or symbol to accurately describe and represent.

Your Creative Freedom

You can include very long messages as well and unique artwork as long as it is approved and considered to be possibly manufactured by the company you chose. Most companies provide you the freedom to fully design your customized silicone bracelet by not placing their logo anywhere. Turnaround time can be anywhere from 2 weeks to a month which include the time of design approval. Some manufacturers have a color palette with over 800 colors so you can be sure to have a great creative time mixing and matching tones. Make sure that the quality is top of the line that will last for several years.

Delivery

Price for each custom silicone bracelet is around $3 to $5 with additional charges for more text and intricate artwork and patterns. If you order in bulk, prices can go down to as low as $1 per bracelet. Using more colors does not necessarily affect the price as you are free to choose any from the provided color palette. The wristbands will be delivered right at your doorstep in 6 to 7 days. Some manufacturers include a free polyester bag or presentable box for each piece. Once you make the order, your customizations will immediately be submitted for approval. If approved, the mold will be made, the bracelets will created then finally delivered.

Susan Barcelon is a successful Webmaster and publisher of Just-Bracelets.com. She provides more resources on topics such as custom silicone bracelet [http://www.just-bracelets.com/custom-silicone-bracelet.html], personalized silicone bracelets [http://www.just-bracelets.com] and discount tennis bracelets [http://www.just-bracelets.com/discount-tennis-bracelets.html] that you can research on her website even while lounging in your living room.

View the original article here

Today I want to introduces some affordable jewelry making suppliers on the internet. I hope I can help you to find the cheapest beads and jewelry making tools.  So, let’s get started. Lots of websites specialize in wholesale beads and they don’t afford a competitive price for we individual customers, which makes us quite frustrated. [...]

Source: http://www.900jewelry.com/blog/cheap-jewelry-making-supplies-and-charms

Beaded Jewelry crystal beads wholesale glass beads wholesale jewelry supplies cheap Pandora beads

View the original article here